which includes a USB 3.1 Gen 2 port for a bit more performance with the T5.Download Crack + Setup Native Instruments Komplete 14 Ultimate Crack 2023 Latest Torrent Free Or you could look at adding the OWC Thunderbolt3 dock to give you more USB ports. But the effort to get the fastest IO performance here giving what you are starting with may not be worth the hassle unless you run into real problem.īut seems like you might end up with samples on a 2TB T5 connected a USB 3 hub off one of the USB-A ports. You can find other drives with dual Thunderbolt ports, so for example you can chain a monitor or your interface on the same Thunderbolt chain (thunderbolt does not have USB style hubs that split the thunderbolt connection itself-so called "Thunderbolt hubs" are really docks/IO adapters). The Samsung X5 has a single Thunderbolt port. If you want to go with a Thunderbolt 3/NVMe drive you need a way of chaining that drive with the other peripherals you need. You should find the actual installed size of the libraries, pretty important and must be documented somewhere. The SSD may be too small to run sessions from there. If it was my system I would try to deconfigure the two halfs of the internal Fusion drive (instructions all over the web) and use the SSD part as a boot/system drive and the HDD part (hopefully it's a 7200 RPM drive) as a spare. The inconsistent performance of those drives can be annoying, even annoying enough as a boot/general drive. We all try to shout everywhere to avoid that. At the other extreme you can spend $800 or more on a 2TB NVMe SSD and might still need to spend time tuning NI to get it to perform as you want. ![]() it could be that you'll get acceptable to you performance on a 4800 RPM HDD. A Samsung T5 is a good example.Īnd what are you trying to achieve/solve/worried about? Session startup/sample load time? VI sample streaming performance, Trying to reduce cost? etc. So if you have a USB-C port free use that with a USB 3.1 Gen 2 SSD on those ports which will give slightly faster performance (not the 2x the raw USB 3.1 Gen 1 -> Gen 2 speeds imply). For many users this is a great choice at less than half the price of a same sized X5. But you need thing specific here, a 2018 iMac has a USB 3.1 Gen 2 via the USB-C ports and USB 3.0 aka 3.1 Gen 1 via the USB-A ports. What are connected to your USB-C/Thunderbolt ports now?Ī USB SSD sample drive. and reduce the number of drives/cables/connectors needed. If you don't have a fast internal SSD I'd consider this and try running sessions on the same drive. Get a Thunderbolt 3 NVMe SSD like a Samsung X5, that will give you performance close to the internal NVMe SSD. But unless you purchased the largest internal SSD then NI complete likely won't fit. If you have samples that can fit on an internal super-fast SSD, start by trying to put them there, shared with the session. USB SSDs at best are multiple of times slower than an internal NVMe SSD. ![]() way better than a Glyph GT062E (use that as a backup drive). ![]() ![]() That is almost always the best location to run your sessions. If you have an internal SSD that is a stinking fast PCIe/NVMe SSD. What internal drive does the iMac have? How large is it and how much free space does it have? How large are the NI sample libraries ?
0 Comments
Leave a Reply. |